Pellet Stove Dealers Near Me
A pellet stove makes use of solid combustible tablet made from compressed sawdust and wood waste to provide heat to your home. Some models burn biofuels such as nutshells or corn kernels.
Pellet stoves do not have a chimney and require electrical power to operate the auger that is used to feed the pellets into the fire. This is why certain manufacturers offer backup battery systems to ensure that the stove will continue operating in a power outage.
Freestanding Pellet Stoves
Homeowners who are looking for additional heat typically opt for freestanding pellet stoves. They can be used to warm a single space or several, and they're also easy to clean and operate. They are able to burn pellets made of compressed sawdust that look similar to the kind your pet rabbit could consume. The pellets are placed in the hopper, and a electric auger is used to feed the pellets into the stove's combustion chamber to start the combustion process. The wood pellets release heat which is circulated through an air blower and spreads throughout the room. This type of heat is more appealing than a traditional wood stove or ductless mini-split, and it's also less costly to run than a gas or propane furnace.
Pellet stoves may have a minimalist design that is less intrusive than wood-burning models. They're also less maintenance-intensive than fireplaces and often come with digital controls that make it easy to control the amount of heat produced. Some models can be programmed and connected to a thermostat, which can save homeowners money on heating bills.
You should select a pellet stove that has been inspected for efficiency and clean combustion by the U.S. Environmental Protection Agency and also by a third party organization like the Pellet Fuels Institute (PFI). Also, you should look for an Underwriters Laboratories label or Canadian ULC certification to show that the stove has met safety standards.
You'll need a plan for a power failure, since these appliances depend on electricity to run their automated functions. Certain models, like the Piazzetta Marcella 2.0 has a backup battery system that keeps the fans and automatic feeders running when the power goes out.
Insert Pellet Stoves
Pellet stoves are installed inside a fireplace to replace a traditional wood-burning fire. They are high-efficiency and offer lots of heating power, similar to freestanding pellet stoves. They also use renewable fuels instead of fossil gas or wood, and don't emit greenhouse gases. The savings in energy costs can be significant over the course of time. You can also get an income tax credit of 30% (up to $2,000 per year) on the cost of your pellet insert.
The main difference between pellet and wood fireplace inserts is that they burn compressed milled wood byproducts instead of seasoned wood. This lets them burn more hot and more quickly than traditional wood-burning fireplaces. This reduces emissions and boosts energy efficiency. They are also more convenient to use, requiring less ash. They feature automatic ignition and self-starting functions that make it easy to start the fire. The fire is fed continuously by a hopper so it isn't necessary to manually feed it as you would with a traditional wood-burning fireplace.
However, pellet fireplaces have a few drawbacks. They require adequate dry storage space for the pellet fuel. The automated features of these models are powered by electricity, so they could not be accessible in the event of a power outage. Some models emit a sound when they are in operation and are suitable for homes with acoustic.
Custom Pellet Stoves
Pellet stoves offer a clean efficient and energy-efficient alternative to wood fireplaces and traditional wood stoves. Pellets made of compressed wood sawdust and other wood byproducts are used to make them more eco-friendly than burning real wood. They also emit less carbon dioxide than wood stoves. Because they are easy to use and low operating costs pellet stoves are gaining in popularity. There are a variety of options available, whether you want a pellet heater for your basement or a new stove for your house.
If you're thinking of purchasing pellet stoves, look for a dealer who has experience with these hearth products. A reliable dealer will offer expert advice, and will install your stove properly, and service it when required. A factory-trained technician is an important element of the process and will help you understand how to operate and maintain your stove.
pellet stove stores near me Fireplaces and Stove of your house and your heating requirements will determine which stove is the best for you. It is generally recommended to select a stove that can provide 5,000 British Thermal Units (BTUs) or heating power, for each 200 square feet of living space. It is also important to consider how much you're willing to spend on fuel and other sources of heat that are available in your home.
It is important to remember that pellet stoves were only intended to be a secondary heating source, not a primary one. They are not designed to replace furnaces and are not recommended for homes with insufficient insulation. They should only be installed only in areas with enough access to the existing venting system. Pellet stoves can also require electricity to run their automated features such as the pellet feeder and fan. These appliances can be operated manually or by battery backup systems in the event that the power goes out.
Pellet Stove Repair
Pellet stoves need regular maintenance in order to function safely and efficiently. To avoid costly repairs in the future, it's important to know the signs of a stove that is having problems. For example, if the flame dances lazily and has black tips, insufficient air is most likely the reason. This problem can be caused by dirty burners, a blocked auger or hopper, or even a heating setting. It is best to speak with a fireplace technician in this situation.
A professional will usually assess the needs of a pellet stove and provide necessary maintenance at $100-$150 per hour. This includes cleaning the stove, fixing or changing the exhaust fan, and lubricating the moving parts. Repair costs may vary based on the nature of the issue. a certified technician should provide an estimate prior to completing work.
Typical issues that require professional attention include soot or smoke coming from the chimney, low heat, and a noisy operation. These issues could also result from a defective damper or blower. A local fireplace technician can repair the blower for $275 to $440 and the damper for $380 - $550.
Auger motor failure is another common issue. This is a concern because it can affect the stove's ability to feed fuel into the burn pot. The auger motor can cost between $80 and $150, and it could take a local fireplace technician up to three hours to install the replacement. It is also a good idea to clean the hopper and firepot on a regular basis. Doing this can reduce the amount of ash that builds up on the glass door and impedes the view of the flame. A local fireplace technician, for instance could take off the burnpot cover and employ a brush to remove the ash that has accumulated.
Pellet Stove Installation
A pellet stove can be erected at a new residence or converted to a wood-burning fireplace insert. Installation costs differ based on the location. They start at $1,000 for a freestanding model and vary from $3,000 to $5,000 for wall-mounted units. A venting system may add up to $1,200 to the cost depending on whether it's going to be an ordinary horizontal vent or a ceiling vent that requires a chimney.
Pellet stoves offer a number advantages that make them more convenient and cost-effective than other heating methods. They use less fuel than wood-burning or gas stoves, and they can be programmed to automatically shut off and on at predetermined times. They also let you choose between high and low temperatures making them more flexible than traditional wood stoves.
The size and type of pellet stove you need is dependent on the amount of heat you'll need to generate for your home. As a rule of thumb you'll need around 5,000 British Thermal Units to heat 200 square feet of living space. However, factors like insulation and climate may influence the calculation.
Consider how much fuel you'll require and where you plan to keep it when looking for the best pellet stove. A dealer can assist you in determining the amount of BTUs your home requires by visiting it and taking measurements. A professional will suggest a pellet stove that produces enough heat to your home based on the amount of living space you wish to warm.
A pellet stove requires electricity to power its motorized components, therefore it should be placed near a power outlet that supports 110 volts. It is recommended to install an additional generator that will keep the stove running in case of a power failure.